Skip to content

Frozen pipe burst repair cost (2026): plumber, drywall, and the water damage

2026 cost to repair a burst frozen pipe: $200–$1,500 plumbing fix, plus $1,000–$10,000 water damage restoration. What insurance covers, emergency rates, and how to shut off water fast.

Cost: $200–$1,500 (plumbing) / $1,000–$10,000 (water damage)Time: 2–6 hr plumbing / days to weeks for dry-outDifficulty: Hard — emergency pro work
By Ken Hoven · Published · Updated

Still trying to fix it? This page is about what the job costs and whether to do it yourself. For step-by-step troubleshooting, see our sister site FixItReal: How to keep pipes from freezing.

A burst frozen pipe is two separate bills: the plumbing repair (usually $200–$1,500) and the water damage cleanup (often 5–10× that). The split depends almost entirely on how fast you got to the main water shut-off. Here's what each part costs in 2026 and what your insurance will — and won't — cover.

Quick cost summary

Scope Typical 2026 cost
Single pinhole leak repair (copper or PEX, accessible) $200–$500
Burst pipe section replacement (accessible) $400–$1,000
Burst pipe in wall or ceiling (open, repair, close) $800–$2,500
After-hours / emergency plumber markup +$100–$400 or 1.5–2× rate
Water damage: minor (one room, caught quickly) $1,000–$3,500
Water damage: moderate (multiple rooms, drywall replacement) $3,500–$10,000
Water damage: major (two stories, hardwood, mold remediation) $10,000–$30,000+
Typical all-in for a caught-quick single pipe burst $1,500–$5,000
Typical all-in for an unnoticed burst (hours before discovery) $8,000–$25,000

The plumbing repair is the small number. The water damage is the big one.

First: shut off the water

If you're reading this with water actively leaking, close this and go turn off the main water shut-off valve — usually in the basement, utility room, garage, or near where the service line enters the house. Turn clockwise until it stops. Then open the lowest faucet in the house to drain the system.

If you can't find or turn the main shut-off, go to the street — the curb stop is in a round metal cover near the property line. You need a long T-handle key (or a long screwdriver and pliers in a pinch). Some utilities charge for shut-off at the curb; most don't during an emergency.

Every minute of flow is $10–$50 of eventual damage. Shut it off first, call the plumber second.

What the plumbing repair actually involves

Accessible pipe (exposed in a basement, garage, or utility room): Cut out the burst section, solder in a new piece of copper or crimp in PEX with SharkBite or PEX fittings. 1–2 hours of plumber time, $200–$500 if the fix is a clean repair.

Pipe in a wall or ceiling: The plumber needs to cut the drywall to access the pipe, make the repair, and either close the drywall themselves (uncommon) or leave the hole for a drywall contractor. The repair itself is straightforward; the opening + restoration drives the price. $800–$2,500.

Multiple failures: A long freeze often bursts several pipes at once. The plumber sometimes won't know until the water is back on — expect add-ons on the invoice if more leaks appear during the pressure test.

Emergency / after-hours: Nights, weekends, and holidays carry a surcharge. A $400 daytime repair can be $600–$900 at 2 AM. If the water is off and nothing is actively leaking, waiting until morning often saves $200–$400.

Water damage: the real cost

This is where the bill explodes. Industry pricing follows IICRC (Institute of Inspection, Cleaning and Restoration Certification) categories:

Category 1 water (clean supply-line water, which a frozen pipe burst is):

  • Dry-out typically uses fans, dehumidifiers, and moisture meters for 3–5 days
  • $500–$1,500 for equipment and setup
  • $800–$2,500 for drywall removal and replacement in one affected room
  • $1,500–$5,000 for flooring replacement (carpet, LVP) if it got wet
  • $3,000–$10,000+ for hardwood refinishing or replacement
  • $1,500–$4,000 for ceiling drywall plus any insulation above

Mold remediation adds $500–$6,000 if drying wasn't fast enough (the EPA's threshold is 24–48 hours for wet building materials before mold risk climbs sharply).

Restoration contractors vs. doing it yourself: If one closet got wet and you run fans and a dehumidifier for 3 days, you can dry it out. If a ceiling collapsed, if drywall is wet above 24 inches, or if the water ran for more than 1–2 hours, call a water damage restoration company — the insurance claim will usually cover their work and they have the moisture meters, thermal cameras, and containment setup to catch hidden moisture before it becomes mold.

What insurance covers (and doesn't)

Typically covered under a standard HO-3 homeowners policy:

  • Sudden and accidental water damage from a burst pipe
  • Water damage to building materials (drywall, flooring, cabinets)
  • Personal property damaged by the water
  • Temporary housing if the home is unlivable

Typically NOT covered:

  • Repair of the pipe itself (it's a maintenance item in most policies)
  • Damage from a gradual leak (deemed maintenance / "long-term seepage")
  • Damage if the home was unoccupied and heat was off (some policies require 55°F minimum)
  • Mold remediation beyond a small cap ($5,000–$10,000 typical limit)

Call your insurance agent before you authorize work beyond emergency mitigation. Document everything with photos and video first; the adjuster will want to see the damage before dry-out. Most policies require you to "mitigate" (shut off water, start drying) but not to make permanent repairs before the adjuster inspects.

Deductible math: if the damage is $4,000 and your deductible is $2,500, the net claim is $1,500 — weigh whether filing is worth the premium increase at next renewal (often 10–20%).

What you can do before the plumber arrives

  • Shut off the main water. Already covered.
  • Turn off the water heater — if the tank drains while heating, the element or burner can burn out.
  • Turn off electricity to any wet areas at the breaker, including any outlet or fixture below a leak.
  • Move everything you can out of the wet zone. Lift furniture off wet carpet with foil squares or wood blocks to prevent staining.
  • Start air movement. Open windows if the outdoor temperature is above 50°F; otherwise fans only.
  • Photograph everything. Every room, every wet thing, from multiple angles, before you move or clean anything.

Supplies to have on hand on Amazon

  • Emergency pipe repair clamps (SharkBite-compatible) — temporary stop-the-flow while you wait for the plumber.
  • Self-fusing silicone pipe repair tape — holds under pressure for emergency containment.
  • Main water shut-off / curb stop key (T-handle) — if you can't find or work your house main.
  • 70-pint dehumidifier — start drying within 24–48 hours per EPA mold guidance.
  • Pinless moisture meter — tells you when drywall and framing are actually dry.
  • Wet/dry shop vac (12 gal+) — fast initial water removal.

As an Amazon Associate, Home Repair Planner earns from qualifying purchases.

How to prevent the next one

The cheapest burst pipe is the one that never happens. See our how to prevent frozen pipes checklist — foam pipe insulation on vulnerable runs, 55°F minimum indoor temperature, and dripping a faucet during deep cold are the three high-leverage moves.

Common questions

How much does it cost to fix a burst pipe?

In 2026, the plumbing repair alone runs $200–$500 for an accessible pipe and $800–$2,500 if the pipe is inside a wall. Add $100–$400 for emergency/after-hours service. Water damage restoration typically dwarfs the plumbing cost, running $1,000–$10,000+ depending on how long water flowed and what it reached.

Will my homeowners insurance cover a burst pipe?

Most standard HO-3 policies cover the water damage from a sudden burst pipe but not the pipe repair itself. Coverage is usually denied if the home was unoccupied with the heat off below the policy minimum (often 55°F), or if the leak was gradual rather than sudden.

Can I repair a burst pipe myself?

A homeowner with soldering or PEX crimping experience can repair an accessible burst in copper or PEX. For a pipe in a wall, inside a joist bay, or in a ceiling, call a plumber — the opening and inspection are as important as the repair itself.

How long do I have before mold starts?

The EPA threshold is 24–48 hours of wet building materials before mold risk climbs sharply. Start air movement and dehumidification immediately, and get a professional moisture inspection within 48 hours if more than a small area is affected.

Should I call a plumber or a restoration company first?

Both, in parallel. The plumber stops the leak and repairs the pipe; the restoration company handles drying, mold prevention, and repair of the water-damaged materials. Many insurance adjusters now expect restoration companies on site within 24 hours.

How fast can I turn off the water?

Average residential main shut-off valves close in 10–30 seconds once you find them. The problem is finding them under pressure — know where yours is BEFORE you need it. Walk down tonight and locate it. If it's a gate valve that hasn't been turned in a decade, consider upgrading it to a quarter-turn ball valve ($150–$400 by a plumber) before winter.

About these numbers: cost ranges are typical 2026 U.S. planning figures compiled from published cost guides and retailer pricing. They are not quotes. Verify prices locally, and use a licensed professional for electrical, gas, roofing, structural, and permit-required work.

Some links on this page are affiliate links. As an Amazon Associate, Home Repair Planner earns from qualifying purchases. Contractor quote requests go through Networx, which is paid by participating contractors; we may earn a referral fee. Full disclosure.