Just got your home inspection report? Turn it into a repair plan
A 40-page inspection report is not a to-do list. Here's how to sort the findings into a hiring plan: which trade handles each repair, what order to book them in, and what each line should roughly cost before you call anyone.
Still trying to fix it? This page is about what the job costs and whether to do it yourself. For step-by-step troubleshooting, see our sister site FixItReal: A sample home inspection report, finding by finding.
The report lands in your inbox, you scroll past the photos, and the count at the bottom says 20-some deficiencies. Almost every one ends with the same sentence: recommend repairs be completed by a licensed contractor. Which contractor? For all of them? In what order, and with what budget?
That's the part the inspector doesn't do, and it's the part this page does. You don't need to understand every finding in depth to act on it — you need to know which trade to call, which calls to make first, and roughly what each line should cost so you can spot a bad quote when it arrives.
Step 1: Sort the list by trade, not by page order
Inspection reports are organized the way the inspector walks the house — exterior, roof, structure, electrical, and so on. A repair plan is organized by who you're going to call, because contractors quote by trade, and one visit covering five line items is far cheaper than five visits covering one each.
Not sure which findings are worth acting on at all? FixItReal's guide to what must be fixed after a home inspection covers that triage first. Then go through the report once with a highlighter (or a spreadsheet) and tag every deficiency with a trade. Here's the mapping for the categories that show up on nearly every report:
| What the report flags | Who to call | Typical cost band* |
|---|---|---|
| Shingle wear, damaged ridge caps, exposed fasteners on vents, missing kick-out flashing | Roofer | $200–$1,500 for repairs; see the roof calculator if it's replacement territory |
| Clogged or organic-growth-filled gutters, drainage directing water at the house | Gutter/handyman service | $150–$600 |
| Cracked brick veneer, mortar gaps, sunken or settled concrete (driveways, walks, garage slabs, stoops) | Mason or concrete contractor; slab leveling is its own specialty | $400–$3,000; cracks tied to movement may need a structural engineer's opinion first ($300–$700) |
| Deck wood rot, loose or rotted railings, corroded joist hangers, uneven steps | Deck contractor or carpenter | $300–$2,500 for repairs; railing and structural items first — they're the safety flags |
| Chimney flagged for service or further evaluation | Chimney sweep (CSIA-certified) for Level 2 inspection, then mason if repairs surface | $150–$450 for the inspection; repairs vary widely |
| Wood-destroying insect activity (termites, carpenter ants, carpenter bees) | Pest control company, then a carpenter for damaged wood | $150–$600 treatment; wood repair is a separate quote |
| Loose, cracked, or improperly fastened siding; trim gaps | Siding contractor | $300–$1,500 for sections |
| Crawl-space moisture, incomplete vapor barrier, displaced insulation, fungal growth on framing | Crawl-space/foundation contractor | $500–$4,000 depending on scope; get the moisture source fixed before paying for remediation |
| Breakers that won't test or reset, receptacles wired wrong, improvised wiring (extension cords feeding fixed appliances), dead exhaust fans | Licensed electrician | $150–$300 per small item; panel work more — see panel upgrade guide |
| Condensate lines that can't drain, blocked outdoor coils, units that won't respond, corroded drain pans | HVAC technician | $150–$650 per item; aging systems: AC and furnace calculators |
| Drain traps showing leak signs, stoppers missing or stuck, corroded hose bibs, water heater service issues | Plumber | $100–$400 per item; water heater calculator if the unit itself is near end of life |
| Failed window seals (fogged double panes), windows that won't operate | Window company for glass/sash replacement | $200–$600 per window for sash or glass unit; full replacement is a different project |
| Rotted door jambs, torn window screens, interior drywall cracks, missing switch plates, small carpentry | Handyman | $100–$500 per item, often bundled into one visit |
*Planning bands for a typical U.S. market, not quotes — see the note at the bottom of this page. Your report, your region, and what the contractor finds once things are opened up all move the number.
When you're done tagging, most 25-item reports collapse into five to seven phone calls. That's a manageable plan.
Step 2: Put the calls in the right order
Not every trade should come out the same week. Book in this order and you avoid paying twice:
- Anything actively letting water in or marked a safety concern. Roof penetrations, flashing gaps, electrical faults, trip hazards. These calls happen this week — water and electrical problems compound, and they're the items that matter in a purchase negotiation.
- Water management before interior repairs. If the crawl space is damp, fix gutters, grading, and the vapor barrier before paying anyone to replace insulation or treat framing. Remediation done before the moisture source is fixed is money spent twice.
- Systems next: electrical, HVAC, plumbing. Most inspection-report items in these trades are small per-item fixes. Batch everything for each trade into a single service call and hand the tech the full list on arrival.
- Envelope and cosmetic last. Siding sections, masonry repointing, screens, interior cracks. Important for the house's lifespan, rarely urgent on a scale of weeks.
If you're buying the house, this order is also your negotiation order: items in group 1 and 2 are where repair credits are usually argued, because they're the ones a lender or insurer may also care about. Groups 3 and 4 are more commonly absorbed by the buyer — which makes knowing their real cost before you waive anything worth the evening it takes.
One contractor or seven?
The tempting shortcut is handing the whole report to a general contractor. Sometimes that's right — but know the trade-off:
- A GC makes sense when the report's big items cluster into one renovation-sized project (structural repair plus the siding plus the masonry on the same wall, say), or when you're out of state and need one accountable party. Expect a 10–20% coordination markup on the subs' prices.
- A handyman bundle makes sense for the long tail: door jambs, screens, stoppers, caulk, small drywall. One day-rate visit ($300–$700 in most markets) can clear eight minor line items — often the cheapest single call on the whole plan.
- Direct trade hires make sense for everything licensed: electrical, plumbing, HVAC, roofing. These trades quote their own work all day, there's nothing for a GC to coordinate on a one-visit repair, and the license itself is the accountability. Verify it in minutes with the contractor license lookup.
Step 3: Turn report language into a quotable scope
Contractors don't quote inspection reports — the language is deliberately hedged ("recommend further evaluation") because the inspector can't open walls. Calling a roofer and reading them the report paragraph gets you an open-ended "we'll take a look." Instead, for each trade, write two or three lines of plain scope:
"Three items from an inspection: re-secure or replace damaged attic vent flashing and exposed fasteners, add kick-out flashing at two roof-to-wall junctions, and assess shingle granule loss on the south face. Looking for a written repair quote, and your read on remaining shingle life."
That message gets you a real number, usually without a paid trip. Attach the report's photos for that section — every report has them, and they're exactly what an estimator wants to see.
Then hold the line on process, the same one that applies to any hire:
- Three quotes on anything over about $1,000. Bids on identical inspection repairs routinely spread 30–40%. The quote comparison worksheet lines them up item by item.
- Written scope on everything, even small jobs — "per inspection report" is not a scope. Each quote should list the items it covers, so you can tell a $900 bid covering three items from a $700 bid covering one.
- License, insurance, and lien waivers on the licensed trades. The find-a-pro checklist covers what to verify and the questions that separate pros from phone-answerers.
Step 4: Build the budget before the quotes arrive
Price the plan first and the quotes have something to be measured against. Add up the cost bands from your tagged list, then add 15–20% contingency — inspection repairs are discovery-prone, because the inspector flagged symptoms and the contractor finds causes. A "re-secure loose siding" line becomes "replace the rotted sheathing behind it" often enough to plan for.
The repair planner does this arithmetic for you for common jobs — DIY versus pro pricing with contingency built in — and the budget worksheet is the printable version for the full list. For the big-ticket single items (roof, water heater, AC, furnace, sump pump), the per-project calculators give a tighter range than any table can. Once the report is handled, the same accrual logic sets your annual maintenance budget going forward.
Two line items deserve special handling in the budget:
- "Unable to inspect" items are unpriced risk, not zero. A room the inspector couldn't access or equipment that couldn't be operated isn't a pass — budget a service call to get it evaluated, especially before a purchase closes.
- "Further evaluation by a specialist" items come in two invoices. An engineer's or specialist's assessment ($300–$700) first, then the repair it specifies. Don't let a contractor skip to step two on a structural question; the assessment is what tells you whether the $800 fix or the $8,000 fix is the honest one.
The one-evening version
Tag every finding with a trade. Sort into the four urgency groups. Write a two-line scope per trade and send it with the report photos to three contractors each for the licensed work. Bundle the small stuff into one handyman day. Price it all with contingency before the first quote lands. That's the whole method — a 40-page report in, a phone list and a budget out.
About these numbers
Cost bands on this page are typical 2026 U.S. planning ranges compiled from published contractor cost guides; they are not quotes, and inspection-driven repairs vary more than most because scope grows with what's found. Verify pricing locally and use licensed professionals for electrical, gas, roofing, structural, and permit-required work.
Related planning guides
About these numbers: cost ranges are typical 2026 U.S. planning figures compiled from published cost guides and retailer pricing. They are not quotes. Verify prices locally, and use a licensed professional for electrical, gas, roofing, structural, and permit-required work.
Some links on this page are affiliate links. As an Amazon Associate, Home Repair Planner earns from qualifying purchases. Contractor quote requests go through Networx, which is paid by participating contractors; we may earn a referral fee. Full disclosure.