Roof replacement cost in Seattle, WA (2026)
| Architectural shingles, underlayment, ice-and-water shield, drip edge, flashing, vents | $4,725 – $7,560 |
| Labor: tear-off and installation, crew of 3–6, 1–3 days | $6,885 – $10,530 |
| Dumpster and disposal of one existing layerPermit fees and rotted-decking replacement are not included; the calculator notes them as extras | $2,565 – $4,590 |
Estimate, not survey data. These Seattle figures are the national planning estimate adjusted by the highest-cost metro regional multiplier (1.35×). Actual quotes will vary. Try the interactive calculator →
Seattle homeowners can expect to pay $14,243 to $22,680 for a typical roof replacement project in 2026, 35% above the national average. Third-highest homeowner spending per capita ($13,350/year). Washington's aggressive energy code is pushing the market toward heat pumps for both heating and cooling. Rain makes waterproofing and moisture management central to every project.
Why roof replacement costs differ in Seattle
Seattle falls into the highest-cost metro tier for home repair costs — nyc, sf bay area, la, seattle, boston, dc, hawaii, alaska. Several local factors drive this:
- •Highest-tier labor costs
- •Aggressive state energy code pushes heat pump adoption
- •Rain and moisture complicate exterior work schedules
- •Strong tech-sector economy keeps labor in high demand
Seattle climate and scheduling
Persistent rain and dampness accelerate roof wear and make waterproofing critical for every exterior project.
June through September — the dry window. Exterior painting and roofing should be completed before fall rains begin in October. Interior work (water heaters, furnaces) is year-round.
Roof replacement permits in Seattle
Residential permit fees in Seattle, WA typically run $100–$400 for this type of work. Seattle DCI handles permits. Washington State energy code is among the most stringent in the nation. Heat pump installations are increasingly common and often required for new systems.
Your contractor should pull the permit and build the fee into their quote. If they suggest skipping the permit, that's a red flag — unpermitted work can create problems with insurance claims, home sales, and code compliance.
Signs it's time to replace in Seattle
Persistent rain and dampness accelerate roof wear and make waterproofing critical for every exterior project. Watch for these signs:
- ⚠Asphalt shingles 20+ years old with widespread granule loss, curling or cracking
- ⚠Leaks in more than one area, or a repair history that keeps growing
- ⚠Daylight visible through the roof deck, or sagging between rafters
- ⚠Significant storm damage across much of the roof (often an insurance claim, not a repair)
- ⚠A second layer already installed — most codes allow at most two layers, so the next job is a full tear-off
Get a more specific estimate
The figures above are for a typical job in Seattle. Your project may differ based on system size, materials, access, and condition. Use our interactive calculator to adjust the inputs for your specific situation.
Open the roof replacement calculator →Other home repair costs in Seattle
Roof replacement cost in other cities
Where these numbers come from
National figures come from the sources below. Seattle figures apply the highest-cost metro regional multiplier (1.35×) to account for local labor rates and cost of living.
| Source | Published figure | Basis |
|---|---|---|
| NerdWallet — Cost to Replace Roof Shingles in 2026 | About $10,000 on average per HomeAdvisor; $4.25–$25 per sq ft depending on material | Editorial estimate |
| JobNimbus — How Much Does a New Roof Cost in 2026 | $9,000–$24,000 for a typical 2,000 sq ft home, national average near $14,000 for architectural asphalt; $350–$1,200 per square installed | Editorial estimate |
| Bill Ragan Roofing — Shingle Roof Cost (2026) | Architectural shingles $5–$7 per sq ft installed (contractor's published pricing) | Editorial estimate |
Last updated November 2026. Figures are planning estimates, not quotes. Methodology · Disclosure