Skip to content

Furnace replacement cost in Seattle, WA (2026)

Seattle installed price (planning estimate)
$5,400 – $8,775
Midpoint about $7,000 · 35% above the national average
Do it yourself?
Pro only
Licensed trade and permit work
Permits
$100–$400
Typical Seattle residential permit
Where a typical Seattle pro price goes
Condensing gas furnace, 60–80k BTU, single-stage$2,565 – $4,050
Labor, one day for 1–2 technicians, including startup$1,620 – $2,565
PVC intake/exhaust run, condensate drain or pump, gas and electrical reconnection, thermostat$810 – $1,485
Permit, inspection, haul-away$405 – $675

Estimate, not survey data. These Seattle figures are the national planning estimate adjusted by the highest-cost metro regional multiplier (1.35×). Actual quotes will vary. Try the interactive calculator →

Seattle homeowners can expect to pay $5,400 to $8,775 for a typical furnace replacement project in 2026, 35% above the national average. Third-highest homeowner spending per capita ($13,350/year). Washington's aggressive energy code is pushing the market toward heat pumps for both heating and cooling. Rain makes waterproofing and moisture management central to every project.

Why furnace replacement costs differ in Seattle

Seattle falls into the highest-cost metro tier for home repair costs — nyc, sf bay area, la, seattle, boston, dc, hawaii, alaska. Several local factors drive this:

  • •Highest-tier labor costs
  • •Aggressive state energy code pushes heat pump adoption
  • •Rain and moisture complicate exterior work schedules
  • •Strong tech-sector economy keeps labor in high demand

Seattle climate and scheduling

Climate
Oceanic (marine west coast) — summer highs around 76°F, winter lows around 36°F.

Persistent rain and dampness accelerate roof wear and make waterproofing critical for every exterior project.

Best time to schedule

June through September — the dry window. Exterior painting and roofing should be completed before fall rains begin in October. Interior work (water heaters, furnaces) is year-round.

Furnace replacement permits in Seattle

Residential permit fees in Seattle, WA typically run $100–$400 for this type of work. Seattle DCI handles permits. Washington State energy code is among the most stringent in the nation. Heat pump installations are increasingly common and often required for new systems.

Your contractor should pull the permit and build the fee into their quote. If they suggest skipping the permit, that's a red flag — unpermitted work can create problems with insurance claims, home sales, and code compliance.

Signs it's time to replace in Seattle

Persistent rain and dampness accelerate roof wear and make waterproofing critical for every exterior project. Watch for these signs:

  • ⚠The furnace is 15–20+ years old and needs a repair costing more than about a third of a new unit
  • ⚠A cracked heat exchanger — a safety condition, and effectively the end of the furnace
  • ⚠Frequent breakdowns, short cycling, or a blower or control board failure on an old unit
  • ⚠Yellow or flickering burner flames, soot, or a CO alarm event (shut it down and call a pro)
  • ⚠Rising gas bills and uneven heat despite a clean filter and sealed ducts

Get a more specific estimate

The figures above are for a typical job in Seattle. Your project may differ based on system size, materials, access, and condition. Use our interactive calculator to adjust the inputs for your specific situation.

Open the furnace replacement calculator →

Other home repair costs in Seattle

Furnace replacement cost in other cities

See all cities →

Where these numbers come from

National figures come from the sources below. Seattle figures apply the highest-cost metro regional multiplier (1.35×) to account for local labor rates and cost of living.

SourcePublished figureBasis
Carrier — Gas Furnace Replacement GuideInstalled cost of a new furnace typically $3,800–$12,000 in 2026Manufacturer guidance
HVACBase — Furnace Installation Cost (2026)Gas furnace $3,500–$8,500 installed, national average $5,500Editorial estimate
Inch Calculator — Cost to Install a Furnace$5,000–$7,500 for a 2,000 sq ft home reusing existing ductwork, average about $6,250Editorial estimate

Last updated November 2026. Figures are planning estimates, not quotes. Methodology · Disclosure