Skip to content

Deck staining cost in Denver, CO (2026)

Denver installed price (planning estimate)
$1,035 – $2,243
Midpoint about $1,600 · 15% above the national average
DIY materials
$305 – $399
Parts and materials at local prices
Permits
$50–$200
Typical Denver residential permit
Where a typical Denver pro price goes
Stain, cleaner, and brightener for about 300 sq ft (roughly 4 gallons of stain)$173 – $288
Labor on the deck floor: wash, brighten, dry time, light sanding, apply$633 – $1,438
Railings and balusters, about 40 linear ftStripping an old failed finish is a separate line in the calculator$230 – $518

Estimate, not survey data. These Denver figures are the national planning estimate adjusted by the higher-cost metro regional multiplier (1.15×). Actual quotes will vary. Try the interactive calculator →

Denver homeowners can expect to pay $1,035 to $2,243 for a typical deck staining project in 2026, 15% above the national average. Highest average homeowner spending on improvements in the U.S. ($14,200/year). Altitude requires gas appliance derating, and intense UV at elevation accelerates exterior paint and roof degradation.

Why deck staining costs differ in Denver

Denver falls into the higher-cost metro tier for home repair costs — large metros: chicago, denver, atlanta, phoenix, minneapolis, portland. Several local factors drive this:

  • •Altitude derating for gas appliances adds complexity
  • •Intense UV degrades exterior finishes faster
  • •Hail damage is common (affects roofing and painting quotes)
  • •Strong construction market keeps labor costs elevated

Denver climate and scheduling

Climate
Semi-arid continental — summer highs around 90°F, winter lows around 16°F.

High altitude (5,280 ft) affects gas appliance sizing and combustion — furnaces and water heaters must be derated for altitude.

Best time to schedule

May through September for exterior work. Hailstorms peak in June and July — schedule roofing before or after. Furnace replacement is best in September before the heating season.

Deck staining permits in Denver

Residential permit fees in Denver, CO typically run $50–$200 for this type of work. Denver CPD handles permits through the eDPS portal. Standard residential water heater and furnace permits process in about 5 business days. High altitude affects gas appliance sizing.

Your contractor should pull the permit and build the fee into their quote. If they suggest skipping the permit, that's a red flag — unpermitted work can create problems with insurance claims, home sales, and code compliance.

Get a more specific estimate

The figures above are for a typical job in Denver. Your project may differ based on system size, materials, access, and condition. Use our interactive calculator to adjust the inputs for your specific situation.

Open the deck staining calculator →

Other home repair costs in Denver

Deck staining cost in other cities

See all cities →

Where these numbers come from

National figures come from the sources below. Denver figures apply the higher-cost metro regional multiplier (1.15×) to account for local labor rates and cost of living.

SourcePublished figureBasis
Homewyse — Cost to Stain a Deck (May 2026)$2.96–$6.16 per square foot national averageCost-database estimate
Inch Calculator — Cost to Paint or Stain a Deck (2026)$2–$5 per square foot; most spend about $850Editorial estimate
LawnStarter — Cost to Stain a Deck (2025)$520–$980, national average $730; $1–$3.25 per square foot for basic stainingEditorial estimate

Last updated November 2026. Figures are planning estimates, not quotes. Methodology · Disclosure