Home repair costs in Denver, CO (2026)
Denver is in the higher-cost metro tier for home repair pricing — large metros: chicago, denver, atlanta, phoenix, minneapolis, portland. Highest average homeowner spending on improvements in the U.S. ($14,200/year). Altitude requires gas appliance derating, and intense UV at elevation accelerates exterior paint and roof degradation.
Furnace replacement cost in Denver: $4,600 – $7,475
A typical furnace replacement in Denver runs $4,600 to $7,475 installed in 2026, with a midpoint near $6,000. That is about 15% above the national planning estimate of $4,000–$6,500. This is licensed trade and permit work, not a DIY job.
Priced for: 60,000–80,000 BTU gas furnace, 95–97% AFUE single-stage, new PVC venting, same cabinet footprint.
| Condensing gas furnace, 60–80k BTU, single-stage | $2,185 – $3,450 |
| Labor, one day for 1–2 technicians, including startup | $1,380 – $2,185 |
| PVC intake/exhaust run, condensate drain or pump, gas and electrical reconnection, thermostat | $690 – $1,265 |
| Permit, inspection, haul-away | $345 – $575 |
New furnace cost by efficiency in Denver
| 80% AFUE — standard, metal vent | $3,910 – $7,130 |
| 95–97% AFUE — condensing, PVC vent | $4,600 – $7,475 |
Installed, with everything else held at: Staging / blower: Single-stage, fixed-speed blower; Furnace size (BTU input): 60,000–80,000 BTU (typical); Venting situation: New PVC intake/exhaust run needed; Ductwork changes: None — same cabinet footprint.
New furnace cost by size in Denver
| 40,000–60,000 BTU (small home / mild climate) | $4,140 – $6,727 |
| 60,000–80,000 BTU (typical) | $4,600 – $7,475 |
| 80,000–100,000 BTU (larger home / cold climate) | $5,060 – $8,223 |
| 100,000–120,000 BTU | $5,520 – $8,970 |
Installed, with everything else held at: Efficiency: 95–97% AFUE — condensing, PVC vent; Staging / blower: Single-stage, fixed-speed blower; Venting situation: New PVC intake/exhaust run needed; Ductwork changes: None — same cabinet footprint.
What moves this price in Denver
- •Altitude derating for gas appliances adds complexity
- •A gas furnace delivers less heat at Denver's elevation than its nameplate says. Manufacturers typically call for derating input 4% per 1,000 feet, about 20% in one trade worked example for Denver, and the figure varies by model. Ask each bidder for the altitude-adjusted output, not the nameplate BTU. Source: ACHR News — Selecting heating and cooling units for high-altitude homes
- •Before pricing a like-for-like replacement, price a heat pump too: Power Ahead Colorado, a Denver Regional Council of Governments program, offers a $1,500 rebate on an ENERGY STAR cold-climate heat pump installed by one of its verified contractors, and it can be combined with other rebates. Source: Power Ahead Colorado — rebate program overview
- •Permit: typically $50–$200 for residential work. Denver CPD handles permits through the eDPS portal. Standard residential water heater and furnace permits process in about 5 business days. High altitude affects gas appliance sizing.
Quote requests are handled by Networx. No charge to you; Home Repair Planner may earn a fee. Disclosure
Price your own job in the furnace replacement calculator · Denver permits, signs to replace and sources
AC replacement cost in Denver: $7,935 – $10,695
A typical AC replacement in Denver runs $7,935 to $10,695 installed in 2026, with a midpoint near $9,500. That is about 15% above the national planning estimate of $6,900–$9,300. This is licensed trade and permit work, not a DIY job.
Priced for: 3-ton system, mid-tier 16–17 SEER2, existing ductwork reused, AC only.
| Condenser + matched indoor coil, 3-ton, 16–17 SEER2 two-stage | $4,715 – $6,440 |
| Crew labor, one day (typically two technicians), startup and commissioning | $1,955 – $2,760 |
| Line set flush or replacement, pad, disconnect, whip, thermostat | $690 – $805 |
| Permit, refrigerant charge, recovery and disposal of old equipment | $575 – $690 |
AC replacement cost by system size in Denver
| 1.5 ton (up to ~900 sq ft) | $4,830 – $6,325 |
| 2 ton (~1,000–1,300 sq ft) | $5,290 – $7,130 |
| 2.5 ton (~1,300–1,600 sq ft) | $6,612 – $8,913 |
| 3 ton (~1,600–2,000 sq ft) | $7,935 – $10,695 |
| 3.5 ton (~2,000–2,300 sq ft) | $9,258 – $12,477 |
| 4 ton (~2,300–2,700 sq ft) | $10,580 – $14,260 |
| 5 ton (~2,700–3,300 sq ft) | $13,225 – $17,825 |
Installed, with everything else held at: Efficiency tier: Mid — 16–17 SEER2; Ductwork: Good — reuse as is; Replace the furnace / air handler too?: No — AC only (condenser + coil).
What moves this price in Denver
- •Before pricing a like-for-like replacement, price a heat pump too: Power Ahead Colorado, a Denver Regional Council of Governments program, offers a $1,500 rebate on an ENERGY STAR cold-climate heat pump installed by one of its verified contractors, and it can be combined with other rebates. Source: Power Ahead Colorado — rebate program overview
- •Permit: typically $50–$200 for residential work. Denver CPD handles permits through the eDPS portal. Standard residential water heater and furnace permits process in about 5 business days. High altitude affects gas appliance sizing.
Quote requests are handled by Networx. No charge to you; Home Repair Planner may earn a fee. Disclosure
Price your own job in the AC replacement calculator · Denver permits, signs to replace and sources
Roof replacement cost in Denver: $12,132 – $19,320
A typical roof replacement in Denver runs $12,132 to $19,320 installed in 2026, with a midpoint near $15,500. That is about 15% above the national planning estimate of $10,550–$16,800. This is licensed trade and permit work, not a DIY job.
Priced for: 1,600 sq ft footprint, medium pitch (about 19 squares), architectural asphalt, one story, one existing layer.
| Architectural shingles, underlayment, ice-and-water shield, drip edge, flashing, vents | $4,025 – $6,440 |
| Labor: tear-off and installation, crew of 3–6, 1–3 days | $5,865 – $8,970 |
| Dumpster and disposal of one existing layerPermit fees and rotted-decking replacement are not included; the calculator notes them as extras | $2,185 – $3,910 |
Roof replacement cost by house size in Denver
| 1,000 sq ft footprint | $7,590 – $12,075 |
| 1,500 sq ft footprint | $11,385 – $18,113 |
| 2,000 sq ft footprint | $15,180 – $24,150 |
| 2,500 sq ft footprint | $18,975 – $30,187 |
| 3,000 sq ft footprint | $22,770 – $36,225 |
Installed, with everything else held at: Roof pitch: Medium (4/12–7/12) — typical; Material: Architectural asphalt shingle; Stories: 1 story; Existing layers to tear off: 1 layer.
Roof replacement cost by material in Denver
| 3-tab asphalt shingle | $11,040 – $15,985 |
| Architectural asphalt shingle | $12,132 – $19,320 |
| Standing-seam metal | $22,080 – $39,215 |
| Concrete or clay tile | $24,265 – $43,585 |
Installed, with everything else held at: House footprint: 1,600 sq ft; Roof pitch: Medium (4/12–7/12) — typical; Stories: 1 story; Existing layers to tear off: 1 layer.
What moves this price in Denver
- •Hail damage is common (affects roofing and painting quotes)
Quote requests are handled by Networx. No charge to you; Home Repair Planner may earn a fee. Disclosure
Price your own job in the roof replacement calculator · Denver permits, signs to replace and sources
Water heater replacement cost in Denver: $1,380 – $2,818
A typical water heater replacement in Denver runs $1,380 to $2,818 installed in 2026, with a midpoint near $2,100. That is about 15% above the national planning estimate of $1,200–$2,450. Doing it yourself, materials run about $840–$1,628.
Priced for: 50-gallon gas tank, like-for-like swap, easy access (garage or basement).
| 50-gallon gas tank water heater, mid-grade | $805 – $1,495 |
| Plumber labor, 2–4 hours, including flex connectors and fittings | $460 – $1,035 |
| Permit, inspection, and haul-away of the old unitCode-required extras (expansion tank, pan, strapping) are priced by the calculator when you select them | $86 – $288 |
Water heater replacement cost by type and size in Denver
| Gas tank, 40 gal | $1,265 – $2,588 |
| Gas tank, 50 gal | $1,380 – $2,818 |
| Electric tank, 40 gal | $1,093 – $2,358 |
| Electric tank, 50 gal | $1,208 – $2,473 |
| Tankless gas (whole-house) | $2,300 – $4,888 |
| Heat pump (hybrid), 50 gal | $2,588 – $4,428 |
| Heat pump (hybrid), 65 gal | $2,933 – $4,888 |
| Heat pump (hybrid), 80 gal | $3,277 – $5,463 |
Installed, with everything else held at: Same type as the old one?: Yes — like-for-like swap; Location: Garage or basement, easy access.
What moves this price in Denver
- •Altitude derating for gas appliances adds complexity
- •Permit: typically $50–$200 for residential work. Denver CPD handles permits through the eDPS portal. Standard residential water heater and furnace permits process in about 5 business days. High altitude affects gas appliance sizing.
Quote requests are handled by Networx. No charge to you; Home Repair Planner may earn a fee. Disclosure
Price your own job in the water heater replacement calculator · Denver permits, signs to replace and sources
Interior painting cost in Denver: $460 – $977
A typical interior painting in Denver runs $460 to $977 installed in 2026, with a midpoint near $725. That is about 15% above the national planning estimate of $400–$850. Doing it yourself, materials run about $231–$294.
Priced for: One 12×12 room with 8-ft ceilings, walls only (about 380 sq ft of wall), mid-grade paint, walls in good condition.
| Paint and sundries: about 3 gallons mid-grade, rollers, tape, drop cloths | $126 – $184 |
| Painter labor: prep, cut-in, two coats on about 380 sq ft of wall | $328 – $747 |
| Minor patching and caulkCeilings, trim, extra rooms, and heavy repair are priced by the calculator | $29 – $52 |
Interior painting cost by number of rooms in Denver
| 1 room | $460 – $977 |
| 2 rooms | $977 – $1,955 |
| 3 rooms | $1,438 – $2,933 |
| 5 rooms | $2,415 – $4,945 |
| 8 rooms | $3,852 – $7,877 |
Installed, with everything else held at: Paint ceilings too?: No — walls only; Trim, doors & baseboards: Leave as is; Paint quality: Mid-grade ($50/gal) — recommended; Wall condition: Good — minor nail holes.
Cost to paint one 12×12 room, walls only vs. walls and ceiling in Denver
| No — walls only | $460 – $977 |
| Yes — walls and ceilings | $633 – $1,323 |
Installed, with everything else held at: Rooms to paint: 1 rooms; Trim, doors & baseboards: Leave as is; Paint quality: Mid-grade ($50/gal) — recommended; Wall condition: Good — minor nail holes.
Quote requests are handled by Networx. No charge to you; Home Repair Planner may earn a fee. Disclosure
Price your own job in the interior painting calculator · Denver permits, signs to replace and sources
Deck staining cost in Denver: $1,035 – $2,243
A typical deck staining in Denver runs $1,035 to $2,243 installed in 2026, with a midpoint near $1,600. That is about 15% above the national planning estimate of $900–$1,950. Doing it yourself, materials run about $305–$399.
Priced for: 300 sq ft deck plus 40 linear ft of railing, clean-and-brighten prep, semi-transparent stain.
| Stain, cleaner, and brightener for about 300 sq ft (roughly 4 gallons of stain) | $173 – $288 |
| Labor on the deck floor: wash, brighten, dry time, light sanding, apply | $633 – $1,438 |
| Railings and balusters, about 40 linear ftStripping an old failed finish is a separate line in the calculator | $230 – $518 |
Deck staining cost by deck size in Denver
| 150 sq ft | $690 – $1,495 |
| 300 sq ft | $1,035 – $2,243 |
| 500 sq ft | $1,495 – $3,277 |
| 800 sq ft | $2,185 – $4,830 |
Installed, with everything else held at: Railing length: 40 linear ft; Current condition: Clean & brighten only (sound finish or bare wood); Stain type: Semi-transparent (1–2 coats).
What moves this price in Denver
- •Intense UV degrades exterior finishes faster
Quote requests are handled by Networx. No charge to you; Home Repair Planner may earn a fee. Disclosure
Price your own job in the deck staining calculator · Denver permits, signs to replace and sources
Estimate, not survey data. These Denver figures are the national planning estimate adjusted by the higher-cost metro regional multiplier (1.15×). They are not contractor quotes; actual bids will vary with system size, materials, access and condition. How the estimates are built
About the Denver market
Semi-arid continental — summers around 90°F, winters around 16°F. High altitude (5,280 ft) affects gas appliance sizing and combustion — furnaces and water heaters must be derated for altitude.
May through September for exterior work. Hailstorms peak in June and July — schedule roofing before or after. Furnace replacement is best in September before the heating season.
$50–$200 for residential work. Denver CPD handles permits through the eDPS portal. Standard residential water heater and furnace permits process in about 5 business days. High altitude affects gas appliance sizing.
2.9 million (MSA)
What drives costs in Denver
- •Altitude derating for gas appliances adds complexity
- •Intense UV degrades exterior finishes faster
- •Hail damage is common (affects roofing and painting quotes)
- •Strong construction market keeps labor costs elevated
Compare with other cities
Last updated November 2026. All figures are planning estimates, not quotes. Methodology