Skip to content

Home repair costs in Washington, DC (2026)

Washington, DC is in the highest-cost metro tier for home repair pricing — nyc, sf bay area, la, seattle, boston, dc, hawaii, alaska. Second-highest homeowner spending per capita ($14,000/year). The metro spans three jurisdictions (DC, VA, MD), each with different codes, permits, and contractor licensing. Historic districts add another layer.

Furnace replacement cost in Washington, DC: $5,400 – $8,775

A typical furnace replacement in Washington, DC runs $5,400 to $8,775 installed in 2026, with a midpoint near $7,000. That is about 35% above the national planning estimate of $4,000–$6,500. This is licensed trade and permit work, not a DIY job.

Priced for: 60,000–80,000 BTU gas furnace, 95–97% AFUE single-stage, new PVC venting, same cabinet footprint.

Where a typical Washington, DC price goes
Condensing gas furnace, 60–80k BTU, single-stage$2,565 – $4,050
Labor, one day for 1–2 technicians, including startup$1,620 – $2,565
PVC intake/exhaust run, condensate drain or pump, gas and electrical reconnection, thermostat$810 – $1,485
Permit, inspection, haul-away$405 – $675

New furnace cost by efficiency in Washington, DC

80% AFUE — standard, metal vent$4,590 – $8,370
95–97% AFUE — condensing, PVC vent$5,400 – $8,775

Installed, with everything else held at: Staging / blower: Single-stage, fixed-speed blower; Furnace size (BTU input): 60,000–80,000 BTU (typical); Venting situation: New PVC intake/exhaust run needed; Ductwork changes: None — same cabinet footprint.

New furnace cost by size in Washington, DC

40,000–60,000 BTU (small home / mild climate)$4,860 – $7,898
60,000–80,000 BTU (typical)$5,400 – $8,775
80,000–100,000 BTU (larger home / cold climate)$5,940 – $9,653
100,000–120,000 BTU$6,480 – $10,530

Installed, with everything else held at: Efficiency: 95–97% AFUE — condensing, PVC vent; Staging / blower: Single-stage, fixed-speed blower; Venting situation: New PVC intake/exhaust run needed; Ductwork changes: None — same cabinet footprint.

What moves this price in Washington, DC

  • •DCSEU rebates in the District go to electric equipment: $250 to $5,000 off qualifying heat pumps, heat pump water heaters and air conditioners, with more for switching from gas. The work must be done by a DC-licensed contractor under a Department of Buildings mechanical permit. Source: DCSEU — residential heating and cooling rebates
  • •Permit: typically $100–$400 for residential work. DC DCRA handles permits via Access DC. Historic district review (HPRB) adds time and cost for protected properties. The metro spans DC, Virginia, and Maryland — three different code jurisdictions.
Get furnace replacement quotes in Washington, DC →

Quote requests are handled by Networx. No charge to you; Home Repair Planner may earn a fee. Disclosure

Price your own job in the furnace replacement calculator · Washington, DC permits, signs to replace and sources

AC replacement cost in Washington, DC: $9,315 – $12,555

A typical AC replacement in Washington, DC runs $9,315 to $12,555 installed in 2026, with a midpoint near $11,000. That is about 35% above the national planning estimate of $6,900–$9,300. This is licensed trade and permit work, not a DIY job.

Priced for: 3-ton system, mid-tier 16–17 SEER2, existing ductwork reused, AC only.

Where a typical Washington, DC price goes
Condenser + matched indoor coil, 3-ton, 16–17 SEER2 two-stage$5,535 – $7,560
Crew labor, one day (typically two technicians), startup and commissioning$2,295 – $3,240
Line set flush or replacement, pad, disconnect, whip, thermostat$810 – $945
Permit, refrigerant charge, recovery and disposal of old equipment$675 – $810

AC replacement cost by system size in Washington, DC

1.5 ton (up to ~900 sq ft)$5,670 – $7,425
2 ton (~1,000–1,300 sq ft)$6,210 – $8,370
2.5 ton (~1,300–1,600 sq ft)$7,763 – $10,463
3 ton (~1,600–2,000 sq ft)$9,315 – $12,555
3.5 ton (~2,000–2,300 sq ft)$10,868 – $14,648
4 ton (~2,300–2,700 sq ft)$12,420 – $16,740
5 ton (~2,700–3,300 sq ft)$15,525 – $20,925

Installed, with everything else held at: Efficiency tier: Mid — 16–17 SEER2; Ductwork: Good — reuse as is; Replace the furnace / air handler too?: No — AC only (condenser + coil).

What moves this price in Washington, DC

  • •DCSEU rebates in the District go to electric equipment: $250 to $5,000 off qualifying heat pumps, heat pump water heaters and air conditioners, with more for switching from gas. The work must be done by a DC-licensed contractor under a Department of Buildings mechanical permit. Source: DCSEU — residential heating and cooling rebates
  • •Permit: typically $100–$400 for residential work. DC DCRA handles permits via Access DC. Historic district review (HPRB) adds time and cost for protected properties. The metro spans DC, Virginia, and Maryland — three different code jurisdictions.
Get AC replacement quotes in Washington, DC →

Quote requests are handled by Networx. No charge to you; Home Repair Planner may earn a fee. Disclosure

Price your own job in the AC replacement calculator · Washington, DC permits, signs to replace and sources

Roof replacement cost in Washington, DC: $14,243 – $22,680

A typical roof replacement in Washington, DC runs $14,243 to $22,680 installed in 2026, with a midpoint near $18,500. That is about 35% above the national planning estimate of $10,550–$16,800. This is licensed trade and permit work, not a DIY job.

Priced for: 1,600 sq ft footprint, medium pitch (about 19 squares), architectural asphalt, one story, one existing layer.

Where a typical Washington, DC price goes
Architectural shingles, underlayment, ice-and-water shield, drip edge, flashing, vents$4,725 – $7,560
Labor: tear-off and installation, crew of 3–6, 1–3 days$6,885 – $10,530
Dumpster and disposal of one existing layerPermit fees and rotted-decking replacement are not included; the calculator notes them as extras$2,565 – $4,590

Roof replacement cost by house size in Washington, DC

1,000 sq ft footprint$8,910 – $14,175
1,500 sq ft footprint$13,365 – $21,263
2,000 sq ft footprint$17,820 – $28,350
2,500 sq ft footprint$22,275 – $35,438
3,000 sq ft footprint$26,730 – $42,525

Installed, with everything else held at: Roof pitch: Medium (4/12–7/12) — typical; Material: Architectural asphalt shingle; Stories: 1 story; Existing layers to tear off: 1 layer.

Roof replacement cost by material in Washington, DC

3-tab asphalt shingle$12,960 – $18,765
Architectural asphalt shingle$14,243 – $22,680
Standing-seam metal$25,920 – $46,035
Concrete or clay tile$28,485 – $51,165

Installed, with everything else held at: House footprint: 1,600 sq ft; Roof pitch: Medium (4/12–7/12) — typical; Stories: 1 story; Existing layers to tear off: 1 layer.

Get roof replacement quotes in Washington, DC →

Quote requests are handled by Networx. No charge to you; Home Repair Planner may earn a fee. Disclosure

Price your own job in the roof replacement calculator · Washington, DC permits, signs to replace and sources

Water heater replacement cost in Washington, DC: $1,620 – $3,308

A typical water heater replacement in Washington, DC runs $1,620 to $3,308 installed in 2026, with a midpoint near $2,500. That is about 35% above the national planning estimate of $1,200–$2,450. Doing it yourself, materials run about $880–$1,705.

Priced for: 50-gallon gas tank, like-for-like swap, easy access (garage or basement).

Where a typical Washington, DC price goes
50-gallon gas tank water heater, mid-grade$945 – $1,755
Plumber labor, 2–4 hours, including flex connectors and fittings$540 – $1,215
Permit, inspection, and haul-away of the old unitCode-required extras (expansion tank, pan, strapping) are priced by the calculator when you select them$101 – $338

Water heater replacement cost by type and size in Washington, DC

Gas tank, 40 gal$1,485 – $3,038
Gas tank, 50 gal$1,620 – $3,308
Electric tank, 40 gal$1,283 – $2,768
Electric tank, 50 gal$1,418 – $2,903
Tankless gas (whole-house)$2,700 – $5,738
Heat pump (hybrid), 50 gal$3,038 – $5,198
Heat pump (hybrid), 65 gal$3,443 – $5,738
Heat pump (hybrid), 80 gal$3,848 – $6,413

Installed, with everything else held at: Same type as the old one?: Yes — like-for-like swap; Location: Garage or basement, easy access.

What moves this price in Washington, DC

  • •Permit: typically $100–$400 for residential work. DC DCRA handles permits via Access DC. Historic district review (HPRB) adds time and cost for protected properties. The metro spans DC, Virginia, and Maryland — three different code jurisdictions.
Get water heater replacement quotes in Washington, DC →

Quote requests are handled by Networx. No charge to you; Home Repair Planner may earn a fee. Disclosure

Price your own job in the water heater replacement calculator · Washington, DC permits, signs to replace and sources

Interior painting cost in Washington, DC: $540 – $1,148

A typical interior painting in Washington, DC runs $540 to $1,148 installed in 2026, with a midpoint near $850. That is about 35% above the national planning estimate of $400–$850. Doing it yourself, materials run about $242–$308.

Priced for: One 12×12 room with 8-ft ceilings, walls only (about 380 sq ft of wall), mid-grade paint, walls in good condition.

Where a typical Washington, DC price goes
Paint and sundries: about 3 gallons mid-grade, rollers, tape, drop cloths$149 – $216
Painter labor: prep, cut-in, two coats on about 380 sq ft of wall$385 – $878
Minor patching and caulkCeilings, trim, extra rooms, and heavy repair are priced by the calculator$34 – $61

Interior painting cost by number of rooms in Washington, DC

1 room$540 – $1,148
2 rooms$1,148 – $2,295
3 rooms$1,688 – $3,443
5 rooms$2,835 – $5,805
8 rooms$4,523 – $9,248

Installed, with everything else held at: Paint ceilings too?: No — walls only; Trim, doors & baseboards: Leave as is; Paint quality: Mid-grade ($50/gal) — recommended; Wall condition: Good — minor nail holes.

Cost to paint one 12×12 room, walls only vs. walls and ceiling in Washington, DC

No — walls only$540 – $1,148
Yes — walls and ceilings$743 – $1,553

Installed, with everything else held at: Rooms to paint: 1 rooms; Trim, doors & baseboards: Leave as is; Paint quality: Mid-grade ($50/gal) — recommended; Wall condition: Good — minor nail holes.

Get interior painting quotes in Washington, DC →

Quote requests are handled by Networx. No charge to you; Home Repair Planner may earn a fee. Disclosure

Price your own job in the interior painting calculator · Washington, DC permits, signs to replace and sources

Deck staining cost in Washington, DC: $1,215 – $2,633

A typical deck staining in Washington, DC runs $1,215 to $2,633 installed in 2026, with a midpoint near $1,900. That is about 35% above the national planning estimate of $900–$1,950. Doing it yourself, materials run about $319–$418.

Priced for: 300 sq ft deck plus 40 linear ft of railing, clean-and-brighten prep, semi-transparent stain.

Where a typical Washington, DC price goes
Stain, cleaner, and brightener for about 300 sq ft (roughly 4 gallons of stain)$203 – $338
Labor on the deck floor: wash, brighten, dry time, light sanding, apply$743 – $1,688
Railings and balusters, about 40 linear ftStripping an old failed finish is a separate line in the calculator$270 – $608

Deck staining cost by deck size in Washington, DC

150 sq ft$810 – $1,755
300 sq ft$1,215 – $2,633
500 sq ft$1,755 – $3,848
800 sq ft$2,565 – $5,670

Installed, with everything else held at: Railing length: 40 linear ft; Current condition: Clean & brighten only (sound finish or bare wood); Stain type: Semi-transparent (1–2 coats).

Get deck staining quotes in Washington, DC →

Quote requests are handled by Networx. No charge to you; Home Repair Planner may earn a fee. Disclosure

Price your own job in the deck staining calculator · Washington, DC permits, signs to replace and sources

Estimate, not survey data. These Washington, DC figures are the national planning estimate adjusted by the highest-cost metro regional multiplier (1.35×). They are not contractor quotes; actual bids will vary with system size, materials, access and condition. How the estimates are built

About the Washington, DC market

Climate

Humid subtropical — summers around 88°F, winters around 28°F. Hot, humid summers require reliable AC. True four-season climate means both heating and cooling systems get full use.

Best scheduling window

March through May and September through November for exterior work. Cherry blossom pollen (March–April) can affect exterior paint adhesion. Schedule HVAC before summer heat or winter cold.

Typical permit costs

$100–$400 for residential work. DC DCRA handles permits via Access DC. Historic district review (HPRB) adds time and cost for protected properties. The metro spans DC, Virginia, and Maryland — three different code jurisdictions.

Metro population

6.3 million (MSA)

What drives costs in Washington, DC

  • •Three separate code jurisdictions (DC, VA, MD)
  • •Historic district review requirements
  • •High labor costs and cost of living
  • •Federal requirements for properties near national landmarks

Compare with other cities

Last updated November 2026. All figures are planning estimates, not quotes. Methodology