Skip to content

Furnace replacement cost in Washington, DC (2026)

Washington, DC installed price (planning estimate)
$5,400 – $8,775
Midpoint about $7,000 · 35% above the national average
Do it yourself?
Pro only
Licensed trade and permit work
Permits
$100–$400
Typical Washington, DC residential permit
Where a typical Washington, DC pro price goes
Condensing gas furnace, 60–80k BTU, single-stage$2,565 – $4,050
Labor, one day for 1–2 technicians, including startup$1,620 – $2,565
PVC intake/exhaust run, condensate drain or pump, gas and electrical reconnection, thermostat$810 – $1,485
Permit, inspection, haul-away$405 – $675

Estimate, not survey data. These Washington, DC figures are the national planning estimate adjusted by the highest-cost metro regional multiplier (1.35×). Actual quotes will vary. Try the interactive calculator →

Washington, DC homeowners can expect to pay $5,400 to $8,775 for a typical furnace replacement project in 2026, 35% above the national average. Second-highest homeowner spending per capita ($14,000/year). The metro spans three jurisdictions (DC, VA, MD), each with different codes, permits, and contractor licensing. Historic districts add another layer.

Pricing the other half of the system? AC replacement cost in Washington, DC has its own estimate.

Why furnace replacement costs differ in Washington, DC

Washington, DC falls into the highest-cost metro tier for home repair costs — nyc, sf bay area, la, seattle, boston, dc, hawaii, alaska. Several local factors drive this:

  • •Three separate code jurisdictions (DC, VA, MD)
  • •Historic district review requirements
  • •High labor costs and cost of living
  • •Federal requirements for properties near national landmarks

Washington, DC climate and scheduling

Climate
Humid subtropical — summer highs around 88°F, winter lows around 28°F.

Hot, humid summers require reliable AC. True four-season climate means both heating and cooling systems get full use.

Best time to schedule

March through May and September through November for exterior work. Cherry blossom pollen (March–April) can affect exterior paint adhesion. Schedule HVAC before summer heat or winter cold.

Furnace replacement permits in Washington, DC

Residential permit fees in Washington, DC typically run $100–$400 for this type of work. DC DCRA handles permits via Access DC. Historic district review (HPRB) adds time and cost for protected properties. The metro spans DC, Virginia, and Maryland — three different code jurisdictions.

Your contractor should pull the permit and build the fee into their quote. If they suggest skipping the permit, that's a red flag — unpermitted work can create problems with insurance claims, home sales, and code compliance.

Signs it's time to replace in Washington, DC

Hot, humid summers require reliable AC. True four-season climate means both heating and cooling systems get full use. Watch for these signs:

  • ⚠The furnace is 15–20+ years old and needs a repair costing more than about a third of a new unit
  • ⚠A cracked heat exchanger — a safety condition, and effectively the end of the furnace
  • ⚠Frequent breakdowns, short cycling, or a blower or control board failure on an old unit
  • ⚠Yellow or flickering burner flames, soot, or a CO alarm event (shut it down and call a pro)
  • ⚠Rising gas bills and uneven heat despite a clean filter and sealed ducts

Get a more specific estimate

The figures above are for a typical job in Washington, DC. Your project may differ based on system size, materials, access, and condition. Use our interactive calculator to adjust the inputs for your specific situation.

Open the furnace replacement calculator →

Other home repair costs in Washington, DC

Furnace replacement cost in other cities

See all cities →

Where these numbers come from

National figures come from the sources below. Washington, DC figures apply the highest-cost metro regional multiplier (1.35×) to account for local labor rates and cost of living.

SourcePublished figureBasis
Carrier — Gas Furnace Replacement GuideInstalled cost of a new furnace typically $3,800–$12,000 in 2026Manufacturer guidance
HVACBase — Furnace Installation Cost (2026)Gas furnace $3,500–$8,500 installed, national average $5,500Editorial estimate
Inch Calculator — Cost to Install a Furnace$5,000–$7,500 for a 2,000 sq ft home reusing existing ductwork, average about $6,250Editorial estimate

Last updated November 2026. Figures are planning estimates, not quotes. Methodology · Disclosure